Rev0.10
65
Section 1

Putting Multiple Tracks Together (Bounce)

Although the BR-600 allows the simultaneous playback of
eight tracks, when you run out of tracks, the BR-600 also lets
you copy the recordings of multiple tracks together onto
one track (V-Track). This is called “bounce” (also known as
bounce recording or ping-pong recording).
By combining multiple tracks in this way, you can free up
other tracks in order to record additional performances.
The explanation below uses an example of mixing the
monaural recording on tracks 1 and 2 and the stereo
recording on tracks 3 and 4, and bouncing them to V-Track
2 of tracks 7/8.
1
Set the pan for tracks 1 and 2 to the locations you
desire, set the pan for track 3 all the way to the left
(L50), and the pan for track 4 all the way to the right
(R50).
“Adjusting the Perception of Stereo for the
Sound (Pan)” (p. 49)
2
Play back the song and adjust the volumes for the
tracks 1 to 4 using the REC TRACK faders.
The overall volume is adjusted by the MASTER fader.
At this time, raise the volume as high as possible
without allowing the sound to distort.
Lower the faders for the tracks that you do not want to
mix.
3
Press [STOP].
4
Press [REC MODE] repeatedly until “BOUNCE”
indicator lights up.
The input source is automatically muted. This prevents
the input source from being mixed in and recorded
during bounce recording.
In bounce mode, you can play back eight tracks
simultaneously and record them all to a single, separate
V-Track.
When input sources are selected with INPUT SELECT,
you can have those sounds recorded together.
Furthermore, you can include the sounds from the
Rhythm in the recording.
TRACK 8-V1
TRACK 7-V1
TRACK 6-V1
TRACK 5-V1
TRACK 4-V1
TRACK 3-V1
TRACK 2-V1
TRACK 1-V1
RHYTHM

Track 1–8

TRACK 8-V2
TRACK 7-V2

Separate V-Track

INPUT Rhythm

2,9 3,8,10

4

5

6

7,10

7,9

7