198

Initializing the BR-600’s Settings

Rev0.10
Follow the procedure below to initialize the user effect
patches or song effect patches.
* The same content as that in the Preset patches is copied.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“INI,” and press [ENTER].
fig.06-260
3
Press CURSOR [ ] [ ] to move the cursor to “U
EFX” (user patch) or “S EFX” (song patch), and press
[ENTER].
The confirmation message “Are you sure?” appears in
the display.
(Ex.) when you select “U EFX”
fig.06-270
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT](or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.
This initializes the Rhythm Arrangements, Patterns, and
Drum Kits.
• In Song Arrangement, Step 1 is set to the metronome.
• In song patterns and song drum kits, the step is empty.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“INI,” and press [ENTER].
fig.06-271
3
Press CURSOR [ ] [ ] to move the cursor to
“RHY,” and press [ENTER].
The confirmation message “Are you sure?” appears in
the display.
fig.06-280
4
To continue the initialization, press [ENTER].
To cancel, press [EXIT] (or [UTILITY]).
When [ENTER] is pressed, initialization begins.
After the initialization has been completed, you are
returned to the Play screen.

Initializing the Effect Settings

Initializing the Rhythm

Arrangements/Patterns/Drum Kits