remote control
receiver
speaker
keypad
connector panel
zoom ring | power | ||
cord | |||
focus ring | elevator button | ||
connector | |||
|
| ||
FIGURE 2
Projector
Usage Guidelines
•Do not look directly into the projection lens when the projector is turned on. The bright light may harm your eyes.
•Do not block the grills on the projector. Do not place the projec- tor on cloth table coverings, as they may get sucked up to the vents. Restricting the air flow can cause it to overheat and turn off.
•Handle the projector as you would any product with glass components. Be especially careful not to drop it.
•Avoid leaving the projector in direct sunlight or extreme cold for extended periods of time. If this happens, allow it to reach room temperature before use.
•This projector is not intended for use in a mainframe computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75.
•Transport the projector in a
NOTE: We recommend that you
wait 30 seconds before powering
up the projector after shutting it
down.
3
