BOXLIGHT MP-350m manual Preparing to Connect Your Equipment to the Projector

Preparing to Connect Your Equipment to the Projector

Now you’re ready to connect your equipment. Computers are connected to the CablePro. Video players and other equipment, such as external speakers, are connected directly to the projector.

Steps for connecting the different types of equipment are given on the pages listed below.

Equipment you want to connect	Page
Laptop computer with CablePro	page 8
Desktop computer with CablePro	page 10
Computer with VESA cable	page 12
USB or PS/2 mouse	page 8,
	page 11
Video player	page 13
External speaker	page 15

		wired remote
audio in	L/R audio in	(optional
(for VESA input)		accessory)

			s-video	external
CablePro		composite
				speaker
	15 pin VESA	video
				FIGURE 5

Connector panel

NOTE: Before you continue, make sure the projector and your equipment are turned off. If you’re connecting a computer, make sure the distance between it and the projector is 10 feet or less.

NOTE: In some older computers, the monitor connector does not have a hole for Pin 9. If you have trouble connecting the CablePro cable to your computer, contact Boxlight Technical Support.

NOTE: If you are connecting an older Macintosh computer that does not have a 15-pin connector, you must use Mac adaptors (ordered separately).

7