The Start-up Procedure
Select AM / PM
Step 7: Next, the AM / PM symbol will begin to flash. Using the UP (index AM / PM) or DOWN (index AM / PM) buttons, select AM / PM. See Figure 44.
"AM"/"PM" flashes
Figure 44
Lock in AM / PM
Step 8: Press the RIGHT (Next) button to proceed. This is shown in Figure 45.
Figure 45
Select the Day
Step 9: Finally, select the day. A day will be flashing initially. Using the UP (increase one day) or DOWN (decrease one day) buttons, change the day until the correct day is shown. See Figure 46.
Day of the week flashes
Figure 46
