Temperature sensor
Insertion stick
SERVICE PROCEDURE RG-VI
Gas Control
Testing, Disassembly & Replacement (Honeywell)
The Bradford White
DEFENDER
Safety System®
GAS CONTROL DISASSEMBLY/REASSEMBLY
Step 12. Remove temperature sensor from insertion stick by pulling apart as illustrated below.
Pull inthis direction
Pull in this direction
Step 13. To reassemble Gas Control, follow the previous steps in reverse order. Once Gas Control is reassembled, burner
assembly is reinstalled, and the gas supplyline is reconnected, resume water supply to water heater. Be sure tank
is full of water before relighting.
Step 14. To resume operation, fo llow the instructions locate d on the lighting instructio n label or the lighting ins tructions
located in the installation and operation manual.
27
27
27