13. Technical Specifications
Qualified Output Power: | average | = 14.43 dBm @2441 MHz, 25oC | |
|
| peak | = 18.21 dBm @2402 MHz, 0oC |
13.1. Storage and Operating Environment | |||
13.1.1. Storage |
|
|
|
Temperature | : |
| |
Humidity | : 8% to 95% |
| |
13.1.2. Operational |
|
| |
Temperature | : 0oC to +40oC |
|
|
Humidity | : 20% to 75% |
| |
13.2. Power requirements
13.2.1. Input Voltage Requirements
The product was qualified using a fully rectified AC/DC power supply supplying 800mA @ 5V. To ensure your product performs within the regulatory requirements, you should only use the AC/DC adapter supplied, or approved by Brainboxes.
For your information only, the Voltage tolerances are given below. Minimum 4.3V – Maximum 6V
Correct operation of the product has not actually been tested at these voltage extremes. This additional Voltage information does not in any manner constitute advice or recommendation on alternative power supplies.
13.2.2. Measured current consumption
Measurement scenario | Measured Current (mA) |
Server application, no rf connection | 68.5 |
Slave application, rf connection | 41.7 |
Slave application, file receive mode | 44.1 |
Slave application, file transmit mode | 48.7 |
Master application, no rf connection | 88.4 |
Master application, rf connection | 16.7 |
Master application, file receive mode | 30.3 |
Master application, file transmit mode | 24.9 |
Note: Air separation of 2 metres for all measurements.
Tested using Stack version 16.4.4 and firmware version 2.10, other versions may differ. Maximum measured power (peak) = 120mA. Recommend use minimum of 200mA power adaptor.
Manual for | © Copyright Brainboxes Limited 2004 | Page 36 of 41 |
