OPTIONS | Ramp/Taper Mode |
|
|
|
|
To Clear Ramp/Taper Mode
1.Press OPTS until display shows RAMP TAPER MODE.
2.Press CLR.
3.Press YES to clear all the data in Ramp/Taper Mode.
4.Press ON and continue to program a new Ramp/Taper program.
To Exit Ramp/Taper Mode |
|
1. When infusion is complete, press | to stop the KVO. |
2.Press EXIT.
3.Press END to return to Continuous Mode.
Fast Taper
The infusion can be interrupted to begin an early taper down process during the Ramp/Taper Mode Infusion.
1.Stop the infusion.
2.Press FAST.
3.Enter the FAST Taper Time in hours and minutes.
4.Press OK.
5. Press | to start the infusion. Check for drops in the drip chamber. |
Vista™ basic Instructions for Use | 13/25 |
950787 Rev H 02/03 |
|
