Braun MR 6500 M manual English, Description, Setting the speed, How to operate your handblender

English

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun appliance.

Caution

Please read the use instructions carefully and completely before using the appliance.

•The blades are very sharp!

•Always unplug the appliance when it is left unattended and before assembling, disassembling, cleaning and storing.

•This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.

•Do not hold the motor part A nor the whisk gear box I under running water, nor immerse them in water.

•Braun electric appliances meet appli- cable safety standards. Repairs or the replacement of the mains cord must only be done by authorised service personnel. Faulty, unqualified repair work may cause considerable hazards to the user.

•Before plugging into a socket, check whether your voltage corresponds to the voltage printed on the bottom of the appliance.

•The appliance is constructed to process normal household quantities.

•Neither the beaker H , nor the chopper bowl (c) is microwave-proof.

Description

AMotor part

BOn/off switch for variable speed

CTurbo switch

DButtons for releasing the working parts

EVariable speed regulator

FBlender shaft

GWall mount

HMeasuring beaker with air-tight lid

IWhisk gear box J Whisk

K Chopper

Setting the speed

When activating switch B , the processing speed corresponds to the setting of variable speed regulator E . The higher the setting, the faster the chopping results.

However, maximum processing speed can only be achieved by pressing the turbo switch C . You may also use the turbo switch for instant powerful pulses without having to manipulate the speed regulator.

Depending on the application, we recommend the following speed settings: Handblender 1...turbo

Chopper 1...turbo

Whisk 1...15

How to operate your handblender

The handblender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing drinks and milkshakes.

1.Insert the motor part A into the blender shaft F until it locks.

2.Introduce the handblender in the vessel, then press the on/off switch B or the turbo switch C .

3.To release the blender shaft after use, press buttons D and pull it off.

You can operate the handblender in the measuring beaker H , and just as well in any other vessel. When blending directly in the saucepan while cooking, take the pan from the stove first to protect your handblender from overheating.

How to operate your whisk

Use the whisk only for whipping cream, beating egg whites and mixing sponges and ready-mix desserts.

1.Insert the whisk J into the whisk gear box I , then insert the motor part A into the gear box until it locks.

2.Place the whisk in a vessel and only then, press switch B to operate it.

3.To release, press buttons D and pull off the gear box. Then pull the whisk out of the gear box.

For best results:

•Do not use the beaker H , but a wider bowl.

•Move the whisk clockwise, holding it slightly inclined.

Whipped cream

Only whip up to 400 ml chilled cream (min. 30 % fat content, 4 – 8 °C).

Start with a low speed setting (1) and while whipping, increase the speed to setting 15.

Egg snow

Only whip up to 4 egg whites.

Start with a medium speed setting (7) and while beating, increase the speed to setting 15.

How to operate
your chopper	a
attachment
(a) Chopper gear box	b
(b) Blade	c
(c) Chopper bowl
(d) Anti-slip base/lid
	d

The chopper is perfectly suited for chopping meat, cheese, onions, herbs, garlic, carrots, walnuts, hazelnuts, almonds etc.

For chopping hard goods (e.g. hard cheese), use the on/off turbo switch C .

N.B.: Do not chop extremely hard food, such as ice cubes, nutmeg, coffee beans, and grains.

Before chopping ...

•pre-cut meat, cheese, onions, garlic, carrots (see table page 5)

•remove stalks from herbs, un-shell nuts

•remove bones, tendons and gristle from meet.

1.Caution: Carefully remove the plastic cover from the blade. The blade is very sharp!

Always hold it by the upper plastic part. Place the blade on the centre pin of the chopper bowl (c). Press it down until it locks.

Always place the chopper bowl on the anti-slip base (d).

2.Place the food in the chopper bowl.

3.Put the gear box (a) on the chopper bowl.

4.Insert the motor part A into gear box (a) until it locks.

5.Press switch B or C to operate the chopper. During processing, hold the

8