13
D.Stabilize the trailer. Use only the
adjustable leveling jacks (3 supplied) for
trailer stabilizing and leveling. Jacks
must be placed securely on jack mounts
located on the trailer frame at the rear
of the trailer and on the tongue
(Figure 4). Do not attempt to locate
jacks in any other position. To secure a
jack in position, align jack with a jack
mount and insert safety pin (Figure 5).
Raise and lower jacks by rotating
crank handle.
E. Open Tilt Panels on the safety cage by
pulling the release cable located on both
the front and rear ends (Figure 6). Lock
Tilt Panels into open position with the
attached safety pin (Figure 7).
Figure 5. Align Jack with a Jack
Mount and Insert Safety Pin
Figure 6. Open Tilt Panels Figure 7. Lock Tilt Panels Into
Open Position
Figure 4. Jack Mounts