19
M. Manually spin arms around until the cable nests on the drum (Figure 23).
N. Nest cable in notch on drum (Figure 24).
O. Open cable clamp and secure cable inside (Figure 25).
P. Manually turn arms to wrap 2 complete wraps on drum.
Q. Turn off Arm Disengage switch.
R. Tighten manual wraps against front of drum (Figure 26).
S. Close Access Doors on Tilt Panels and at rear of trailer.
Figure 25. Open Cable Clamp
And Secure Cable Inside
Figure 23. Manually Spin Arms Figure 24. Nest Cable In Notch
On Drum
Figure 26.Tighten Manual Wraps