5 Remote Setup (MFC models only)

Remote Setup

The Remote Setup program lets you configure many machine and network settings from a Windows® application. When you start this application, the settings on your machine will be downloaded automatically to your PC and displayed on your PC screen. If you change the settings, you can upload them directly to the machine.

Click the Start button, All Programs, Brother, MFC-XXXX (or MFC-XXXX LAN/MFC-XXXX LPT) and Remote Setup.

Note

5

• If your machine is connected via a Network, you have to enter your password.

•The default password is "access". You can use BRAdmin Light or Web Based Management to change this password (See the Network Users Guide for details).

„OK

Lets you start uploading data to the machine and exit the Remote Setup application. If an error message is displayed, enter the correct data again and then click OK.

„Cancel

Lets you exit the Remote Setup application without uploading data to the machine.

„Apply

Lets you upload data to the machine without exiting the Remote Setup application.

101