Printing and Faxing

Using the BR-Script3 Driver

(Post Script® 3™ language emulation printer driver)

Note

•To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the control panel before connecting the interface cable. (See Printer Emulation Support on page 128.)

•The BR-Script3 printer driver does not support the PC-Fax Sending.

•For network users, see the Network User’s Guide for installation steps.

You need to install the BR-Script3 printer driver using the following instructions.

Note

If you use a USB cable and Mac OS®, only one printer driver for a machine can be registered in

Printer Setup Utility (Mac OS® X 10.3.9 to 10.4.x) or Print & Fax in System Preferences (Mac OS® X 10.5.x). If a Brother Laser driver is already listed in the Printer list, you will need to remove it and then install the BR-Script3 printer driver. For the information about removing the printer driver, see Removing the

Printer driver for Macintosh® on page 142.

8

„(Mac OS® X 10.3.9 to 10.4.x)

a Choose Applications from the Go menu.

b Open the Utilities folder.

143