Scanning

 

i Click Start.

 

When scanning is finished, click Cancel to return to the PaperPort™ 11SE window.

 

Note

 

 

 

 

 

• After you select a document size, you can adjust the scanning area further by clicking the left mouse button

2

and dragging it. This is required when you want to crop an image when scanning. (See Pre-Scanning to

crop a portion you want to scan on page 35)

•For models that support duplex scanning You cannot adjust the scanning area.

You cannot use legal size paper for duplex scanning. You cannot use the PreScan button to preview an image.

Pre-Scanning to crop a portion you want to scan

You can preview your image and crop unwanted portions before scanning by using the PreScan button.

When you are satisfied with the preview, click the Start button in the Scanner Setup dialog box to scan the image.

a Follow the steps from a to g of Scanning a document into the PC on page 33.

b Choose the settings for Scan (Image Type), Resolution, Scan Type, Brightness, Contrast and Document Size, as needed.

Note

Pre-Scanning is not available if you choose Duplex(two-sided) Scanning.

c Click PreScan.

The whole image is scanned into the PC and appears in the Scanning Area (1) of the Scanner Setup dialog box.

1

35