7 Firewall settings (For Network users)

Before using the Brother software

Firewall settings on your PC may reject the necessary network connection for network printing, network

scanning and PC Fax. If you are using the Windows® Firewall and you installed MFL-Pro Suite from the CD-ROM, the necessary Firewall settings have already been made. If you did not install from the CD-ROM follow the instructions below to configure your Windows Firewall. If you are using any other personal Firewall software, see the User’s Guide for your software or contact the software manufacturer.

UDP Port number information for Firewall configuration

UDP Port

Network Scanning

Network PC-Fax

Network Scanning and

 

 

 

 

 

Network PC-Fax 1

 

 

External Port number

54925

54926

137

 

 

 

 

 

 

 

 

Internal Port number

54925

54926

137

 

 

 

 

 

 

 

7

1 Add Port number 137 if you still have trouble with your network connection after you added port 54925 and 54926. Port number 137 also supports

printing and Remote Setup over the network.

 

 

 

 

Windows® XP SP2

a Click the Start button, Control Panel, Network and Internet Connection and then Windows Firewall. Make sure that Windows Firewall on the General tab is set to On.

b Click the Advanced tab and Settings... button of Network Connection Settings.

c Click the Add button.

d Add port 54925 for network scanning by entering the information below:

1In Description of service: Enter any description, for example "Brother Scanner".

2In Name or IP address (for example 192.168.0.12) of the computer hosting this service on your network: Enter "Localhost".

121