Threading (1)

Bobbin Winding

d

CAUTION

Do not move bobbin winding clutch while machine is running.

c a

b

�1

Spool Cap

b

�2

 

 

 

Spool Cushion

a

Spool of Thread

c

1 Raise the thread guide bar all the way.

2 Mount a spool of thread on the spool pin.

✽1 Use spool cap when using parallel-wound thread. ✽2 Use spool cushion when using cross-wound thread.

5 - 0: See the following illustrations.

Thread Notch 1

Thread Notch 2

Bobbin

Bobbin Winder

Shaft

Guide Pin

Bobbin Winding Clutch

3 Pass the thread through the triangular hole.

4 Pass thread through bobbin winding thread guide as shown in drawing.

5 Run thread through top thread notch 1, and turning the bobbin align bottom thread notch 2 of the bobbin with guide pin on bobbin winder shaft.

6 Press bobbin winding clutch up against empty bobbin. If the bobbin stop does not slide easily between the top and bottom of the bobbin, check that the bobbin is seated properly with the guide pin (5) inserted into the lower notch.

11