Before You Begin (1)

Power Cord and Foot Controller

WARNING

Please use common household current.

●● Plug in cord.

●● Plug foot controller into machine. ●● When you press the foot controller down lightly, the machine will run

at a low speed. When you press harder, the machine’s speed will increase. When you take your foot off the foot controller, the machine will stop.

Power Cord

Foot Controller

Slower Faster

Hand Wheel

●● Position needle using hand wheel.

✽✽ Always turn hand wheel towards you.

CAUTION

Be sure to keep the area under and around the needle clear.

Stitch Length Regulator

●● Adjust desired stitch length using stitch regulator dial.

Hand Wheel

Stitch Length

Reference Mark

1

Power Switch

●● Flip power switch to “I” position to turn on.

●● To switch power off, flip switch to “O” position.

Thread Tension Dial

●● When tighter thread tension is desired, turn the tension dial to the right. Upper and bobbin threads will meet on right side of the fabric.

●● When looser thread tension is desired, turn tension dial to the left. Upper and lower threads will then meet on wrong side of fabric.

Power Switch

I

O

Upper Thread Tension

LoosenTighten

Tension Block

Reverse Stitch Lever

●● Sewing in reverse is possible when the reverse stitch lever is in the lowered position.

✽✽ Make sure to continuously press the lever to its lowest position when reverse sewing is desired.

✽✽ When the feed adjustment dial is set between 5-7 mm, the reverse stitch length is always 5 mm.

7

 

2

Lower number

 

 

 

 

 

 

 

 

= shorter stitches

6

 

3

Higher number

 

= longer stitches

 

 

 

 

5

4

 

 

 

 

Stitch Length Regulator

Reverse Stitch

Lever

7