Using the Automatic Needle Threader
Automatic
Needle
Threader
1
Thread 2
Pin
Hook
✽✽ Pull the thread to the left and check that it is caught on the hook.
1 Rotate hand wheel towards you | 3 Lower automatic needle threader. | 4 Turn the needle threader lever all the | |
until needle is in the highest | ✽✽ | Pull thread along the right side of the pin. | way in the direction of 1 and when |
position, and lower presser foot. | ✽✽ | Do not force the needle threader lower | the hook extends from the needle |
2 Take thread in your left hand, and |
| than the eye of the needle. Be sure that | hole, pull the thread in the direction |
gently pull it forward. |
| the needle is in the highest position. | of 2 to catch it on the hook. |
5 While holding the thread gently, return the needle threader lever to the right. As you do this the hook that has caught the thread will move as well, pulling a loop of thread through the eye of the needle.
6 Before sewing, pull the thread loop to the right and then pull the thread tail towards the back of the machine following the opening in the presser foot.
Needle (HLX5) | Thread |
|
|
#9 | #20 #30 #50 #60 |
|
|
#11 | #20 #30 |
|
|
#14 | #20 #30 |
|
|
#16 | #20 |
|
|
●● The automatic
Transparent nylon thread can be used regardless of the chart, providing the needle used is a #14 or #16.
Using the Spool Net
D
A
C
B
If using transparent nylon thread, metallic thread, or other strong thread, place the included spool net over the spool before using.
If the spool net is too long, fold it once to match it to the spool size before placing it over the spool.
1 Spool net
2 Thread spool
3 Spool pin
4 Spool cap
15