Operation panel

The operation panel, located on the front of the sewing machine, allows you to select a stitch and specify how the stitch will be sewn.

aLCD (liquid crystal display)

The number of the selected stitch (1), the presser foot to be used (2), the stitch length (mm) (3), and the stitch width (mm) (4) are displayed here.

bStitch length key (page 40)

Use to adjust the length of the stitch. (Press the “–” side for a shorter stitch length, or press the “+” side for a longer stitch length.)

cStitch width key (page 41)

Use to adjust the width of the stitch. (Press the “–” side for a more narrow stitch width, or press the “+” side for a wider stitch width.)

dAutomatic reverse/reinforcement stitch key (page 46) The sewing machine can be set to automatically sew reverse or reinforcement stitches at the beginning and end of the stitching.

eNeedle mode selection key (single/twin) (page 25) Press this key to select the twin needle sewing setting. Each time this key is pressed, the setting switches between that for single needle sewing and for twin needle sewing.

Flat bed attachment

The accessories are stored in the storage space in the flat bed attachment.

aSwing the lid of the flat bed attachment toward you to open the storage space.

a

b

aFlat bed attachment

bAccessory compartment

XThe bag of accessories is in the storage space.

Note

●Place the accessories in the bag before storing them in the flat bed attachment. If the accessories are not placed in the accessory bag when stored in the flat bed attachment, accessories may fall out and be lost or damaged.

10