Brother 885-V12 Using the optional walking foot, ■Attaching the walking foot, ■Attaching the presser foot holder

■Attaching the presser foot holder

aAlignbar. the presser foot holder with the presser

a

b

aPresser bar

bPresser foot holder

bHold up the presser foot holder with your right hand, and tighten the screw.

With your left hand, turn the screwdriver clockwise.

Note

●If the presser foot holder is not correctly installed, the thread tension will be incorrect.

CAUTION

●Be sure to securely tighten the presser foot holder screw, otherwise the presser foot holder may fall off and the needle may strike it, causing the needle to bend or break.

Using the optional walking foot

With the optional walking foot, both pieces of fabric

are fed evenly by the feed dogs and the teeth on the 1 presser foot. This is useful when sewing fabrics that

are hard to feed such as vinyl and leather and when sewing fabrics that easily slip such as velvets or when quilting.

Use the screwdriver to attach the walking foot.

■Attaching the walking foot

aRemove the presser foot holder.

•For details, refer to “Removing the presser foot holder” (page 32).

bHook the connecting fork of the walking foot onto the needle clamp screw.

a

b

aConnecting fork

bNeedle clamp screw

33