SEWING BASICS —————————————————————————————————————————————————————————————————————————————————————————————————————

Pulling up the bobbin thread

When making gathers, first pull up the bobbin thread as described below.

aPass the bobbin thread through the slot. Do not cut the thread with the cutter.

• Leave the bobbin cover removed.

bLightly hold the end of the upper thread.

a

aUpper thread

cWith the needle raised, press (needle position button) twice.

aNeedle position button

dCarefully pull the upper thread upward to pull out the end of the bobbin thread.

a

b

aUpper thread

bBobbin thread

ePull out about 10 to 15 cm (4-5 inches) of the bobbin thread under the presser foot toward the rear of the machine.

a

b

aUpper thread

bBobbin thread

fReattach the bobbin cover.

Insert the tab in the lower-left corner of the bobbin cover (A), and then press down on the right side (B).

B

A

50