UTILITY
Sewing overcasting stitches using zigzag foot “J”
aTurn on the machine.
bWith the pattern selection dial, select 
, 
or 
.
cAttach zigzag foot “J”.
•For details, refer to “Replacing the presser foot” (page 31).
dSew along the edge of the fabric with the needle dropping off the edge at the right.
a 
a
a
aNeedle drop point
CAUTION
●After adjusting the stitch width, slowly turn the handwheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
Sewing overcasting stitches using overcasting foot “G”
aTurn on the machine.
bWith the pattern selection dial,
select 
, 
or 
.
cAttach overcasting foot “G”.
•For details, refer to “Replacing the presser foot” (page 31).
dPosition the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever.
a
aPresser foot guide
eSlowly turn the handwheel toward you and check that the needle does not touch the presser foot.
fSew with the edge of the fabric against the presser foot guide.
a
aNeedle drop point
52