Checking the needle

Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated.

Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.

a

b

aFlat side

bNeedle type marking

a

aFlat surface

If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle.

a

aFlat surface

Replacing the needle

Replace the needle as described below. Use the

 

screwdriver and a correct needle, as described in

1

“Checking the needle”.

 

aPress (needle position button) once or twice to raise the needle.

aNeedle position button

bTurn off the sewing machine.

CAUTION

●Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing.

cLower the presser foot lever.

a

aPresser foot lever

CAUTION

●Before replacing the needle, place fabric or paper under the presser foot to prevent the needle from falling into the hole in the needle plate.

29