GETTING READY—————————————————————————————————————————————————————————————————————————————————————————————————————

pRaise the presser foot lever, pass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.

a

a5 cm (2 inches)

XThe upper threading is finished.

■Manually threading the needle

If the needle threader cannot be used, thread the needle as described below.

aThread the machine to the needle bar thread guide, as described in steps a through k of “Threading the upper thread”, and then lower the presser foot lever.

bTurn off the sewing machine.

CAUTION

●Be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing.

cManually pass the thread through the eye of the needle from front to back.

dRaise the presser foot lever.

a

aPresser foot lever

ePass the end of the thread through the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine.

a

a5 cm (2 inches)

24