dAttach monogramming foot “N”.
CAUTION
●Select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break.
●After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.
eStart sewing.
■Drawnwork (Example 1)The fabric is turned and sewn twice.
aPull out several threads from the fabric.
bAttach monogramming foot “N”.
•For details, refer to “Replacing the presser foot” (page 31).
cSelect stitch 
.
•For details, refer to “Selecting a stitch” (page 40).
dWith the right side of the fabric facing up, sew along the right edge of the frayed section.
N
Turn the fabric around to sew the opposite | 3 |
eside. |
|
fSew along the other edge of the frayed section so that it looks like the previous stitching.
N
■Drawnwork (Example 2)aPull out several threads from two sections of the fabric, separated by an unfrayed section of about 4 mm (3/16 inch).
1
a4 mm (3/16 inch)
bAttach monogramming foot “N”.
•For details, refer to “Replacing the presser foot” (page 31).
81