Brother Brother CP-6500 operation manual Fold back the fabric inside along the basting

——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

cUse a chalk to mark on the fabric about 5 mm (3/16 inch) from the edge of the fabric, and then baste it.

3 5 4

eUnfold the edge of fabric, and position the fabric with the wrong side facing up.

1	2
1	2
	<Thick fabric>
1	2

<Normal fabric>

<Seen from the side>

a Wrong side of fabric

b Right side of fabric

c Edge of fabric

d Basting stitching

<Seen from the side>

aWrong side of fabric

bRight side of fabric

cBasting

dEdge of fabric

<Thick fabric>

<Normal fabric>

3

e 5 mm (3/16 inch)

dFold back the fabric inside along the basting.

2 4

3

1

1

<Thick fabric>

1

<Normal fabric>

<Seen from the side>

aWrong side of fabric

bEdge of fabric

cBasting

d5 mm (3/16 inch)

fAttach blind hem foot “R”.

gSelect a stitch.

hRemove the flat bed attachment and make free-arm sewing possible.

•For details on free-arm sewing, refer to “Stitching cylindrical pieces” (page 44).

iSlide the part that you wish to sew onto the arm, make sure that the fabric feeds correctly, and then start sewing.

aArm

jPosition the fabric with the edge of the folded hem against the guide of the presser foot, and then lower the presser foot lever.

R

aWrong side of fabric

bFold of hem

cGuide

49