Brother Brother CP-6500 operation manual Removing the presser foot holder, Remove the presser foot

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————————————————————————————————————————————

fSlowly lower the presser foot lever so that the presser foot pin snaps into the shank in the presser foot holder.

aPresser foot lever

bPresser foot holder

cShank

dPin

XThe presser foot is attached.

gRaise the presser foot lever to check that the presser foot is securely attached.

Removing the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the disc-shaped screwdriver to remove the presser foot holder.

aRemove the presser foot.

•For details, refer to “Replacing the presser foot” (page 33).

bUse the disc-shaped screwdriver to loosen the presser foot holder screw.

aDisc-shaped screwdriver

bPresser foot holder

cPresser foot holder screw

■Attaching the presser foot holder

aAlign the presser foot holder with the lower- left side of the presser bar.

aPresser foot holder

bPresser bar

34