Brother DCP-1000 Inserting Originals for Copying (and Scanning), see, 5.), DO NOT, DO NOT, , page, Paper:, face up, Humidity:, 50% – 70%, in the ADF, top edge first

DO NOT use curled, wrinkled, folded, ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To fax this kind of document, see Using the Scanner Glass, page 1-5.)

Inserting Originals for Copying (and Scanning)

You can copy and scan from the ADF (Automatic Document Feeder) or from the scanner glass.

Using the ADF (Automatic Document Feeder)

The ADF can hold up to 30 pages, feeding each one individually through the machine. Use standard (20 lb/75g/m2) paper when using the ADF. Always fan the pages well before placing them in the ADF.

Recommended EnvironmentTemperature: 68°F – 86°F (20°C – 30°C)

Humidity:	50% – 70%
Paper:	Xerox 4200 or equivalent (20LB/LTR)

■Make sure documents written with ink are completely dry.■Originals must be from 5.8 to 8.5 inches wide, and 5.8 to 14 inches long.1Pull up the Document Extension.

2Fan the pages and stagger them at a 30 degree angle. Insert the pages face up, top edge first in the ADF until you feel them touch the feed roller.

3Adjust the paper guides to fit the width of your original.Originals are Face Upin the ADF

30°

Document Stopper

4Unfold the document stopper.

1 - 4 G E T T I N G T O K N O W Y O U R D I G I T A L C O P I E R / P R I N T E R