PreScanning an Image

PreScanning allows you to scan an image quickly at a low resolution. A thumbnail version of the image will appear in the Scanning Area. This is only a preview of the image so you can see how it will look. The PreScan button is used to preview an image for cropping any unwanted portions from the image. When you are satisfied with the preview, click Start to scan the image.

1Place the original face up in the ADF, or face down on the scanner glass.

2Click PreScan:

The entire original will be scanned into the PC and will appear in the Scanning Area of the Scanner window.

You can crop the prescanned image

3To crop a portion of the document to be scanned, drag any side or corner of the dotted outline in the Scanning Area with the left mouse button. Adjust the dotted outline until it surrounds only the portion of the original you wish to scan.

4Place the original face up in the ADF again, if you used the ADF in Step 1.

5Adjust the settings for Resolution, Scan Type, Brightness, Contrast, and Size in the Scanner Setup window, as needed.

6Click Start.

This time only the selected area of the document will appear in the PaperPort® window.

7In the PaperPort® window, use the options available in the Markups pull-down menu and the Crop option in the Options pull-down menu to refine the image.

USING SCANSOFTPAPERPORT® FOR BROTHER AND SCANSOFTTEXTBRIDGE®

9 - 7