Setting Up the Scanner Configurations

The Pop-Up application stores eight different scanning modes. Each time you scan an original, you will choose the most appropriate scanning mode from the following:

Filing and CopyingText for OCRPhotosPhotos (High Quality)Photos (Quick Scan)CustomDraft CopyFine Copy

Each mode has its own set of stored settings. You can keep the factory default settings or change them at any time:

Resolution—Select the scanning resolution you most frequently use. Color Mode—From the pull-down list, select

Scan Size—From the pull-down list, select Brightness—Slide the adjuster from 0% to 100% Contrast—Slide the adjuster from 0% to 100%

Click OK to save your changes. If you make a mistake or later decide to return to the original default setting, just click Restore Defaults when the scanning mode is displayed.

To Access the Scanner Configurations Screen

1Place the original face up in the ADF. Then the Brother Control Center screen pops up.

2Right-click the appropriate Control Center button to display Configurations…, then click it. The configuration screen for that Control Center button will appear.

3To save your settings, click OK —OR—To return to the factory default settings, click Restore Defaults.

You can not access the Scanner Configuration screen by placing the document on the scanner glass.

8 - 6 U S I N G T H E W I N D O W S ®- B A S E D B R O T H E R M F L - P R O C O N T R O L C E N T E R ( F O R W I N D O W S ® O N L Y )