Loading envelopes and postcards

a Before loading, press the corners and sides of envelopes or postcards to make them as flat as possible.

Note

If envelopes or postcards are ‘double-feeding’, put one envelope or postcard in the paper tray at a time.

b Put envelopes or postcards into the paper tray with the side to be printed on face down, and the shortest edge in first as shown in the illustration. With both hands, gently press and slide the paper side guides (1) and paper length guide (2) to fit the size of the envelopes or postcards.

1

2

Loading paper and documents

If you have problems printing on envelopes with the flap on the short edge, try the following:

a Open the envelope flap.

2

b Put the envelope into the paper tray with

the address side down and the flap

 

positioned as shown in the illustration.

 

c Adjust the size and margin in your application.

Removing small printouts from the machine

When the machine ejects small paper onto the output paper tray you may not be able to reach it. Make sure printing has finished, and then pull the tray completely out of the machine.

11

Page 19
Image 19
Brother DCP-375CW manual Removing small printouts from the machine, Loading envelopes and postcards