How to reset

a Press Menu.

b Press a or b to choose 0.Initial Setup. Press OK.

c Press a or b to choose 4.Reset. Press OK.

d Press a or b to choose the reset you want.

Press OK.

e Press a or b to choose a Reset or

bExit.

f Press a to confirm.

72

Packing and shipping the machine

When you transport the machine, use the packing materials that came with your machine. Follow the instructions below to properly pack your machine. Damage caused to your machine during transit is not covered by your warranty.

IMPORTANT

It is important to allow the machine to ‘park’ the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head.

a Open the ink cartridge cover.

b Press the lock release lever to release the ink cartridge and take out all the ink cartridges. (See Replacing the ink cartridges on page 64.)

c Install the green protective part and then close the ink cartridge cover.

Page 80
Image 80
Brother DCP-375CW manual Packing and shipping the machine, How to reset