g For 1200 dpi, press a or b to select the number of the test print that most closely matches the number 0 sample
1200dpi Adjust
Select Best #5
Press OK.
h Press Stop/Exit.
Checking the ink volume
You can check the ink that is left in the cartridge.
a Press Ink Management.
b Press a or b to choose Ink Volume. Press OK.
The LCD shows the ink volume.
c Press a or b to choose the colour you want to check.
d Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide on the
Troubleshooting and Routine Maintenance
Machine Information
Checking the serial number
You can see the machine’s serial number on the LCD.
a Press Menu.
b Press a or b to choose 5.Machine Info. Press OK.
c Press a or b to choose 1.Serial No. Press OK.
XXXXXXXXX
d Press Stop/Exit.
Reset
The following reset functions are available: | B |
1Network
You can reset the print server back to its default factory settings such as the password and IP address information.
2All Settings
You can reset all the machine settings back to the settings that were set at the factory.
Brother strongly recommends you use this operation when you dispose of the machine.
Note
Unplug the interface cable before you choose Network or All Settings.
71
