Control panel setup
95
6
Ethernet (wired network only) 6
Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT
full or half duplex mode by auto negoti ation.
You can fix the server link mode to 100BA SE-TX Full Duplex (100B-FD) or Half Duplex (1 00B-HD) and
10BASE-T Full Duplex (10 B-FD) or Half Duplex (1 0B-HD). This change is valid after the print s erver has been
reset (default is Auto).
Note
If you incorrectly set this value, you may not be able to communicate with your print server.
aPress Menu.
bPress a or b to choose Network.
Press OK.
cPress a or b to choose Wired LAN.
Press OK.
dPress a or b to choose Ethernet.
Press OK.
ePress d or c to choose Auto/100B-FD/100B-HD/10B-FD/10B-HD.
Press OK.
fPress Stop/Exit.
For Touchscreen models 6
aPress MENU.
bPress Network.
cPress Wired LAN.
dPress Ethernet.
ePress Auto/100B-FD/100B-HD/10B-FD/10B-HD.
fPress Stop/Exit.