Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
21
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
aConfirm your network environment. (See page 23.)
bConfirm your wireless network setup method. (See page 24.)
cConfigure your machine for a wireless network. (See page 27.)
Wireless configuration and installing drivers and software have been completed.
Infrastructure mode
Connected to a computer wit h an access point or
Ad-hoc mode See page22.
Connected to a wireless capable computer
without an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
SES/WPS/AOSS
control panel
menu
Using the PIN
Method of Wi-Fi
Protected
Setup™
Using the Brother
installer
application
Temporarily using
a network cable
Using the
SES/WPS/AOSS
control panel
menu
See page 27. See page 31. See page35.
For Windows®
(See page38.)
For Macintosh®
(See page58.)
For Windows®
(See page 45.)
For Macintosh®
(See page 65.)
Installing drivers and software (See the Quick Setup Guide.)