Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
28
3
iEnter the SSID name. (For information how to type text, see Entering Text on page 161.)
Press OK. Go to j.
jUsing a or b, choose Infrastructure when instructed.
Press OK. Go to k.
If you chose Ad-hoc, go to l.
kChoose the Authentication method using a or b, and press OK.
If you chose Open System, go to l.
If you chose Shared Key, go to m.
If you chose WPA/WPA2-PSK, go to p.
lChoose the Encryption type None or WEP using a or b, and press OK.
If you chose None, go to r.
If you chose WEP, go to m.
mChoose the key option KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
If you chose the key which shows **********, go to n.
If you chose a blank key, go to o.
nIf you want to change the key you chose in m, press a or b to choose Change. Press OK. Go to o.
If you want to keep the key you chose in m, press a or b to choose Keep. Press OK. Go to r.
oEnter a new WEP key. Press OK. Go to r. (For information how to type text, see Entering Text
on page 161.)
pChoose the Encryption type, TKIP or AES using a or b. Press OK. Go to q.
qEnter the password and press OK. Go to r. (For information how to type text, see Entering Text
on page 161.)
rTo apply the settings, choose Yes. To cancel, choose No.
If you chose Yes, go to s.
If you chose No, go back to g.
sThe machine starts to connect to the wireless device you have chosen.
tIf your wireless device is connected successfully, the display shows Connected for 60 seconds and
configuration is completed.
If the connection failed, the display shows Connection Failed for 60 seconds. (See Wireless
network troubleshooting on page 14 5.)
uPress OK.