Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
37
3
Note
The setting page is different, depending on the brand of access point / router. See the instruction manual
that came with your access point / router.
If you are using your Windows Vista® computer as a Registrar, follow the instructions below.
Note
To use a Windows Vista® computer as a Registrar, you need to register it to your network in advance. See
the instruction manual that came with your access point / router.
1Click and then Network.
2Click Add a wireless device.
3Choose your machine and click Next.
4Input the PIN from the printed page and then click Next.
5Choose your network that you want to connect to, and then click Next.
6Click Close.
hIf the LCD shows Connected, the machine has successfully connected to your router or access point.
You can now use your machine in a wireless network.
If the LCD shows Connection Failed, the machine has not successfully connected to your router or
access point. Try starting from e again. If the same message is indicated again, reset the machine back
to the default factory settings and try again. For resetting, see Restoring the network settings to factory
default on page 112.
iPress .
(For Windows®)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose InstallMFL-Pro Suite or
Initial Installation / InstallMFL-Pro Suite from the CD-ROM menu.
(For Macintosh®)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Start Here OSX from the
CD-ROM menu.

Using the Brother automatic insta ller application on the CD-ROM to configure

your machine for a wireless network 3
For installation, see Wireless configuration for Windows® using the Brother installer application (Not available
for MFC-5490CN and MFC-5890CN) on page 38 and Wireless Configuration for Macint osh® using the
Brother installer application (Not av ailable for MFC-5490CN and MFC-5890CN ) on page 58.