Control panel setup
80
6
For Touchscreen models 6
aPress MENU.
bPress Network.
c(For Wired) Press Wired LAN .
(For Wireless) Press WLAN.
dPress TCP/IP.
ePress IP Address.
fEnter the IP address.
gPress OK.
hPress Stop/Exit.
Subnet Mask 6
This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to
obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet
mask to use.
aPress Menu.
bPress a or b to choose Network.
Press OK.
c(For Wired) Press a or b to choose Wired LAN.
(For Wireless) Press a or b to choose WLAN.
Press OK.
dPress a or b to choose TCP/IP.
Press OK.
ePress a or b to choose Subnet Mask.
Press OK.
fEnter the Subnet Mask address.
Press OK.
Note
For DCP models, press a or b repeatedly to enter the first three-digit number for the Subnet Mask. Press
c to enter the second three-digit number. Repeat this step until you have entered the fourth three-digit
number to complete the Subnet Mask. Press OK.
gPress Stop/Exit.