Wireless Configuration for Macintosh® using the Brother installer application (Not available for MFC-5490CN and MFC-5890CN)
67
5
hRead the Important Notice and click Next.
iConfirm the on-screen message and click Next.
jPress Menu, a or b to choose Network and press OK. Press a or b to choose WLAN and then press OK.
Press a or b to choose SES/WPS/AOSS and press OK.
(For Touchscreen models) 5
Press MENU. Press Network. Press WLAN and then pres s SES/WPS/AOSS.
Note
If your wireless access point supports Wi-FiProtected Setup™ (PIN Method) and you want to configure
your machine using the PIN ( Personal Identification Number) Method, see Using the PIN Met hod of Wi-Fi
Protected Setup™ onpage 35.
kThe machine searches for an access point that supports SecureEasySetup™, Wi-FiProtected Setup™
or AOSS™ for 2 minutes.
lPut your access point in the SecureEasySetup™ mode, Wi-FiProtected Setup™ mode or AOSS™
mode, depending on what is supported by your access point. Please refer to the instruction manual that
came with your access point.