Receiving a fax at the end of a conversation
At the end of a conversation you can ask the other party to fax you information before you both hang up.
1 Ask the other party to place the original in their machine and to press Start. Tell the other party to wait until the fax machine sends receiving tones (chirps) before hanging up.
2
3
When you hear the other machine’s CNG tones (beeps), press Fax Start.
The LCD shows: | RECEIVE | |
Replace the handset. | ||
|
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external telephone in the EXT. jack, you can make the fax machine take the call by using the Fax Receive Code. When you press the Fax Receive Code 5 1, the fax machine starts to receive a fax.
(See Easy Receive on page
If the fax machine answers a voice call and
If you answer a call and no one is on the line, you should assume that you’re receiving a manual fax.
■At an extension phone (on a separate telephone wall jack/socket), press 5 1, wait for
■At an external phone (connected to the fax machine’s EXT jack), press 5 1 and wait for the phone to be disconnected before you hang up (the LCD shows
RECEIVE).
Your caller will have to press Start to send the fax.
For FAX/TEL mode only
When the fax machine is in FAX/TEL mode, it will use the F/T Ring Time
If you’re at an extension or external phone, you’ll need to lift the handset during the F/T Ring Time and then press # 5 1 between the double rings. If no one is on the line, or if someone wants to send you a fax, send the call back to the fax machine by pressing 5 1.
SETUP RECEIVE 5 - 5