Press Menu/Set, 6, 2.

Quick Reference Guide

Sending faxes

Automatic transmission

1 Insert the original face down in the ADF (up to 10 pages).

2 Enter the fax number you want to call.

3 Press Fax Start.Receiving faxes

Select Receive Mode

1 Press Receive Mode to select

FAX ONLY, FAX/TEL, TAD:ANSWER MACH. or MANUAL. If you select FAX/TEL, make sure you set Ring Delay and F/T Ring Time. (See Setting the Ring Delay on page 5-2 and Setting the F/T Ring Time (FAX/TEL mode only) on page 5-3.)

Storing numbers

Storing One-Touch Dial numbers

1 Press Menu/Set, 6, 1.

2 Press a One-Touch key where you want to store a number.

3 Enter a number (up to 20 digits), and then press Menu/Set.

4 Enter a name (up to 15 characters) or leave it blank, and then press Menu/Set.

5 Press or to select the type of number and press Menu/Set.

6 Press Stop/Exit.

Storing Speed-Dial numbers

1

2 Enter a two-digit Speed-Dial number (00-99).

3 Press Menu/Set.

4 Enter a number (up to 20 digits), and then press Menu/Set.

5 Enter a name (up to 15 characters) or leave it blank, and then press Menu/Set.

6 Press or to select the type of number and press Menu/Set.

7 Press Stop/Exit.

ix