USER’S GUIDE

To lock or unlock the panel buttons as above, you need to enter a 3-digit pass number.

Change the first digit of the number with the or button and move to the next digit with the Set button. After you finish entering your 3-digit pass number, the panel buttons are locked or unlocked.

Note

Do not forget your pass number that you have used to lock the panel buttons. If you enter a wrong number, you cannot unlock them. The display shows the following message:

INCORRECT!!

Auto Form Feed

If unprinted data remains in the printer’s memory, the Data LED stays on. You need to print out the remaining data with the Form Feed button. See “FORM FEED Button” in Chapter 4.

The auto form feed mode you can set in this menu allows you to print out the remaining data without pressing the Form Feed button.

You can turn on or off the auto form feed in this mode menu as follows:

Display Message

Auto Form Feed

AUTO FF=OFF

Turn off the auto form feed. You need to

 

press the Form Feed button every time

 

data remains in the printer’s memory.

 

(Factory setting)

 

 

AUTO FF=ON

Turn on the auto form feed. Every time data remains in the printer’s memory, an auto form feed takes place after the wait time set as below.

When you turn on the auto form feed as above, you need to set the wait time in the following sub-setting menu:

Display Message

Wait Time

WAIT TIME= 1s

Set the wait time for the auto form feed.

.

The printer automatically prints out the

.

remaining data after the set wait time.

WAIT TIME=99s

The wait time can be set from 1 to 99

 

seconds.

4–42