USER’S GUIDE

Note

When you start using a new Fusing Unit, it is possible that initially poor fixing may occur. If it does, please wait for a while until the oil penetrates through to the Heat Roller.

4.Take out the Fusing Unit from the printer by holding the handles on both sides.

Fig. 5-19 Take out the Fusing Unit from the Printer

!Caution

When taking the Fusing unit out of the printer, be sure to keep the Fusing

Unit flat, so that oil will not be spilt.

5.Remove the Oil Bottle and the Fuser Cleaner from the Fusing Unit.

6.Install the new Fusing Unit into the printer. Insert the Fusing unit fully down into the correct position.

Fig. 5-20 Installing the New Fusing unit

5-18