Brother HL-2400C Set, Set, Notes, Reset, ✒Notes, Selected Mode, Parts replaced, List of Factory Settings, LCD message on the upper row, LCD Message on the lower row

CHAPTER 4 CONTROL PANEL

4.Press the Set button to make the displayed selection effective. The printer is reset according to the selected reset mode.

Selected Mode	LCD message on the upper row
RESET PRINTER	08 RESET TO ￿USER SETTINGS
RESET SETTING 1-2	08 RESET TO ￿SETTING # 1*
FACTORY SETTINGS	09 RESET TO ￿FACTORY
	SETTINGS

1* - # indicates the selected number of saved settings

The printer automatically exits from the reset mode to the on-line state.

5. When you enter the RESET PARTS LIFE mode;

LCD Message on the lower row	Parts replaced
FC ROLLER	Fuser Cleaner
OPC BELT	(OPC) Belt Cartridge
FUSER UNIT	Fixing Unit
120K KIT	Drum Cleaner, Paper discharger,
	Transfer Roller

The reset item is selected according to the Maintenance message that shows the currently recommended maintenance part to replace. Press Set to reset the parts life.

List of Factory Settings

The following table shows the factory settings made before shipment.

✒Notes

￿The settings are subject to the emulation mode. Effective modes are indicated in parentheses in the following table.

￿The following settings cannot be restored to the factory settings with the Reset button in the “FACTORY SETTINGS” mode:

INTERFACE MODE, HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL, and PAGE COUNTER, and local language for display messages.

￿The COPY setting is always restored to the factory setting when the printer is turned off and on again.

￿The user settings are overwritten after resetting to setting 1 or 2.

4–69