Brother HL-2400C Mode, MODE Button Settings in BR-Script2 Mode

USER’S GUIDE

MODE Button Settings in BR-Script 2 Mode

The following table shows all the selections you can make with the Mode button in the BR-Script 2 mode.

✒Note

The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu	Setting
INTERFACE MODE
Same as HP PCL5C Mode

FORMAT MODE	PAGE FORMAT MODE PAPER=LETTER
	(For 120V model)
	PAPER=A4
	(For 220/240V model)

LETTER, LEGAL, A4, A5, B5,

JIS B5, EXECUTIVE, COM10, C5 and DL

			X OFFSET=0		-500 (left) to +500 (right) dots
			Y OFFSET=0		-500 (down) to +500 (up) dots
			exit		Exit to PAGE FORMAT MODE
		COLOR MODE	Same as PCL5C mode
		exit			Exit to PAGE FORMAT MODE
RESOLUTION MODE		RESOLUTION	RESOLUTION=600		300 or 600 dpi
		CAPT SETTING	CAPT=ON		ON or OFF
		HRC SETTING	HRC=MEDIUM		OFF, LIGHT, MEDIUM, or DARK
		exit			Exit to RESOLUTION MODE
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has not been formatted:
	CARD1 FORMAT CARD				Format the flash memory card or
	CARD2				the HDD card.
	exit
		exit			Exit to CARD OPERATION
					CARD 1 (2)
CARD OPERATION CARD1 ( 2 ) When the commercial flash memory card or the HDD card has been formatted:
	CARD1 EXECUTE DATA				Execute the data on the card.
	CARD2		DATA ID=#####		Execute the selected data.
		CARD LIST			Print the contents of the card.
		SAVE	SAVE DATA		Send data to be saved.
				SET KEY--> END	End saving the data.
				DATA ID=#####	Set data ID for saved data.
			exit		Exit to CARD OPERATION
		DELETE	MACRO ID=#####		Delete the selected macro.
			DATA ID=####		Delete the selected data.
			FONT ID=#####		Delete the selected font.
			FORMAT CARD		Format the card.
				SET –> DELETE ALL	Execute formatting the card.
				exit	Exit to FORMAT CARD
					OPERATION
		exit			Exit to CARD 1(2) OPERATION

4–12