USER’S GUIDE

MANUAL MODE

This printer has no manual feed tray or multi-purpose tray. Therefore you cannot feed special paper in the usual way. However this printer has a special manual feed mode with Tray 1 in order to overcome this inconvenience. When “MANUAL MODE=ON” is selected or a manual feed command is sent to the printer, the printer will wait for you to replace the paper in Tray 1 with the paper for manual printing.

1.Press the ▲ or ▼ button to select the manual mode on or off.

2.Press the Set button to make the setting effective.

MEDIA TYPE

When you use any paper other than ordinary plain paper, such as thick bond paper, envelope, or transparency, the appropriate media type must be selected in the media type mode in order to get the best print quality.

1.Press the Set button to enter the media type mode. The display then shows the current setting with an asterisk.

2.Press the ▲ or ▼ button to select regular, thick paper, or transparency then press the Set button to make the setting effective.

✒Note

￿Please do not forget to change the setting back to regular after you have printed on your special media with the setting changed.

SMALL SIZE

This printer can detect the size of paper in the trays automatically. If there is no paper loaded as specified by the user application, the printer indicates to the user to load the correct size paper by displaying “LOAD PAPER XX SIZE” on the LCD panel. The printer can detect A4, Letter, executive, Legal (only in Optional Legal Cassette) and B5(ISO), but not A5, B5(JIS), C5, COM10 and DL size even though they can be handled. For this reason, it is necessary to change the detection size for paper smaller than B5.

1.Press the Set button to enter the small size mode. The display then shows the current setting with an asterisk. Then select “T1” or “T2”.

2.Press the ▲ or ▼ button to select B5 (JIS), B5 (ISO), A5, C5, COM10 or DL then press the Set button to make the setting effective.

(B5 (JIS) and B5 (ISO) only for “T2”.)

4–66