USER’S GUIDE

The following capacity of SIMM can be installed:

•1 Mbyte HITACHI HB56D25632B-6A, -7A, -8A MITSUBISHI MH25632BJ-7, -8

•2 Mbyte HITACHI HB56D51232B-6A, -7A, -8A MITSUBISHI MH51232BJ-7, -8

•4 Mbyte HITACHI HB56A132BV-7A, -7AL, -7B, -7BL, -8AL, -8B, -8BL

MITSUBISHI MH1M32ADJ-7, -8

•8 Mbyte HITACHI HB56A232BT-7A, -7AL, -7B, -7BL MITSUBISHI MH2M32EJ-7, -8, MH2M32DJ-7, -8

•16 Mbyte TOSHIBA THM324000BSG-60, -70, -80

•32 Mbyte TOSHIBA THM328020BSG-60, -70, -80

In general, the SIMM must have the following specifications:

Type:

72 pin and 32 bit or 36 bit output

Access Time: 80 nsec. or less

Capacity:

1, 2, 4, 8, 16 or 32 Mbyte

Height:

46mm (1.8 inches) or less

Parity:

NONE

EDO RAM can be used.

✒Notes

￿There might be some SIMMs which will not work with this printer.

￿For more information about the cards, consult the dealer where you purchased the printer.

￿For the latest information: http://www.brother.com

There are 40 bit output SIMMs for workstations. Such SIMMs do not fit this printer.

For SIMMs and installation, consult the dealer where you purchased the printer.

✒Note

This printer has 3 SIMM slots. The maximum size for each slot is a 32MB SIMM. For the 32MB standard memory model, a 16MB SIMM is pre-installed. If you want to expand the RAM size to 112MB, replace the 16MB SIMM with a 32MB SIMM.

When you install SIMMs, follow these steps:

1. Turn off the printer and unplug the power cord from the AC outlet.

✒Note

Be sure to turn off the power to the printer before installing or removing the SIMMs.

5-36