Appendix

Preset:

Human readable line ON

 

(1)

‘T5’ or ‘t5’

 

(2)

‘T6’ or ‘t6’

 

(3)

‘T130’ or ‘t130’

 

(4)

‘T131’ or ‘t131’

Preset:

Human readable line OFF

 

All others

This parameter shows whether the machine prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’.

Quiet zone

n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767)

Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by A the ‘u’ or ‘U’ parameter. (For the description of ‘u' or ‘U' parameter, see the next section.) The default setting

of the quiet-zone width is 1 inch.

Bar code, expanded character unit, line block drawing and box drawing

n = ‘u0’ or ‘U0’

mm (preset)

n = ‘u1’ or ‘U1’

1/10

n = ‘u2’ or ‘U2’

1/100

n = ‘u3’ or ‘U3’

1/12

n = ‘u4’ or ‘U4’

1/120

n = ‘u5’ or ‘U5’

1/10 mm

n = ‘u6’ or ‘U6’

1/300

n = ‘u7’ or ‘U7’

1/720

This parameter shows the measurement units of X-axis offset, Y-axis offset, and bar code height.

182