Control Panel

Network for HL-4150CDN users

Submenu

Menu Selections

Options

Descriptions

 

 

 

 

 

 

TCP/IP

Boot Method

Auto*/Static/RARP/

Chooses the IP method that best

 

 

 

BOOTP/DHCP

suits your needs.

 

 

IP Address

###.###.###.###

Enter the IP address.

 

 

 

(000.000.000.000)* 1

 

3

 

Subnet Mask

###.###.###.###

Enter the Subnet mask.

 

 

(000.000.000.000)* 1

 

 

 

Gateway

###.###.###.###

Enter the Gateway address.

 

 

 

(000.000.000.000)* 1

 

 

 

IP Boot Tries

0/1/2/3*.../32767

Specifies the number of setting trials

 

 

 

 

when the Boot Method allows

 

 

 

 

automatic IP setting.

 

 

 

 

 

 

 

APIPA

On*/Off

Automatically allocates the IP

 

 

 

 

address from the link-local address

 

 

 

 

range. 1

 

 

IPv6

Off*/On

Sets use of IPv6 protocol.

 

 

 

 

 

 

Ethernet

 

Auto*/100B-FD/100B-HD/

Chooses Ethernet link mode.

 

 

 

10B-FD/10B-HD

 

 

 

 

 

 

 

Status

 

Active 100B-FD/

Shows Ethernet link status.

 

 

 

Active 100B-HD/

 

 

 

 

Active 10B-FD/

 

 

 

 

Active 10B-HD/

 

 

 

 

Inactive

 

 

 

 

 

 

 

MAC Address

 

 

Shows MAC address of the machine.

 

 

 

 

 

 

Network Reset

Restores all network settings of the internal print server to the factory default.

 

 

 

 

 

 

The factory settings are shown in Bold with an asterisk.

1### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP address from the machine's control panel.

75