For Wireless Network Users

7 Confirm your network environment (Infrastructure Mode)

Choose a configuration method and proceed to the page indicated.

Configuration using the Brother installer application on the CD-ROM (Recommended)

„Configuration temporarily using a network cable

You need to temporarily use an Ethernet cable when you configure your Brother printer with this method. The Ethernet cable is not a standard accessory.

1

2

If there is an Ethernet Hub or Router in the same network as the wireless access point a, you can temporarily connect the Hub or Router to the printer using an Ethernet cable b. This is an easy way to configure the printer. You can then remotely configure the printer from a computer on the network.

Now go to

For Windows® Users go to page 24For Macintosh Users go to page 33

Configuration using the automatic wireless (one-push) method

1

If your wireless access point asupports either SecureEasySetup™, Wi-Fi Protected Setup (PBC 1) or AOSS™, you can configure the printer without knowing your wireless network settings. The access point /router and your printer can automatically negotiate using the SecureEasySetup™, Wi-Fi Protected Setup or AOSS™ procedure.

1Push Button Configuration

Configuration using the PIN Method of Wi-Fi Protected Setup

If your wireless access point a supports Wi-Fi Protected Setup, you can also configure using the PIN Method of Wi-Fi Protected Setup. For instructions, see Chapter 7 in the Network User’s Guide on the CD-ROM.

Now go to

For Windows® Users go to page 29

For Macintosh Users go to page 38

Wireless

Windows

®

Network

Macintosh

 

 

23